Robotics

About the course

Rotation matrices and homogeneous transforms, forward kinematics of planar 2R and 3R arms, Denavit-Hartenberg parameters. Inverse kinematics of a 2R arm with two solutions and the number of solutions. The Jacobian, the tip velocity, singular configurations, joint torques from a force at the tip. Joint trajectories: cubic, quintic, trapezoid velocity profile. PID control of a joint, natural frequency, damping, overshoot. Encoders: resolution and speed. Differential drive of a mobile robot and odometry.

Course program: 35 lessons

Pose and orientation

  1. Rotation in the plane
  2. Rotation in space
  3. Homogeneous pose matrix
  4. Inverse transform and chain of frames
  5. Checkpoint: pose and orientation

Forward kinematics and Denavit-Hartenberg parameters

  1. Forward kinematics of a 2R arm
  2. Workspace
  3. Forward kinematics of a 3R arm
  4. Denavit-Hartenberg parameters
  5. Link matrix from Denavit-Hartenberg parameters
  6. Checkpoint: forward kinematics

Inverse kinematics

  1. Inverse kinematics of a 2R arm
  2. The angle q₁ in the inverse problem
  3. The number of solutions of the inverse problem
  4. Checkpoint: inverse kinematics

Velocities and forces

  1. Jacobian of a 2R arm
  2. Tip velocity of an arm
  3. Inverse velocity problem
  4. Singular configurations
  5. Joint torques from a force
  6. Checkpoint: velocities and forces

Trajectory planning

  1. Cubic trajectory
  2. Quintic trajectory
  3. Trapezoid velocity profile
  4. Checkpoint: trajectories

Control and sensors

  1. PID controller: three terms
  2. Joint with a PD controller
  3. Step response
  4. Encoder and its resolution
  5. Speed from an encoder
  6. Checkpoint: control and sensors

Mobile robot

  1. Differential drive
  2. Odometry
  3. Checkpoint: mobile robot

Final test

  1. Final test on robotics